Why it matters
The Hayward ProSeries Sand Filter is a sand filter.
Sand filters are the simplest to own: backwash when pressure rises 8 to 10 psi above clean, and replace the sand every few years (or use glass media).
The listing gives dimensions of 20.3 inL x 20.3 inW x 36.4 inH, a weight of 32.9 pounds and sand construction.
Who it's for, and who should skip it
Good fit if
- Matching an existing pump
- Replacing a worn filter
Look elsewhere if
- Pumps that exceed its rated flow
Pros and cons
Pros
- Sand filter
Cons
- Must be rated for at least your pump's flow
- Backwashing wastes water
Limitations to weigh
- Specifications are the maker's or seller's own; check fit against your equipment's manual and part numbers.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Dimensions (seller) | 20.3"L x 20.3"W x 36.4"H | Retailer |
|---|---|---|
| Material | sand | Retailer |
| Model number | W3S180T | Retailer |
| Product weight | 32.9 lb | Retailer |
| Filter type | Sand Filter | Retailer |
| Pool type | Above Ground | Retailer |
Alternatives worth comparing
More pool filters we cover
- DeeprClean 53015E-2 1,000 GPH Sand Filter Pump
- Bestway 324066 1,500 GPH Cartridge Filter Pump
- Intex Krystal Clear 925 GPH Sand Filter Pump
- Intex Krystal Clear 2,500 GPH Cartridge Filter Pump
All pool filters, compared in one table · Every Hayward product we cover
Final verdict
A practical sand filter for matching an existing pump.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure