Sand filter · VEVOR

VEVOR HCP750A-F Sand Filter

Sand filter for pools

Updated October 2026

Quick verdict

A practical sand filter for matching an existing pump.

Strength
Rated flow 73.33 GPM.
Trade-off
Must be rated for at least your pump's flow.
Right buyer
Matching an existing pump.
Pool type
above ground
Horsepower (maker)
1 hp
Max flow (maker)
73.33 gpm
Voltage
120 V AC
Filter type
Sand Filter
Material
Polypropylene (PP)
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The VEVOR HCP750A-F Sand Filter is a sand filter, rated for up to 73.33 GPM. At that flow it suits a pump moving no more than 73 GPM; match it to your pump's actual flow.

Sand filters are the simplest to own: backwash when pressure rises 8 to 10 psi above clean, and replace the sand every few years (or use glass media).

The listing gives dimensions of 23.43 inL x 20.47 inW x 25 inH, a weight of 37.9 pounds and polypropylene (pp) construction.

Who it's for, and who should skip it

Good fit if

  • Matching an existing pump
  • Replacing a worn filter

Look elsewhere if

  • Pumps that exceed its rated flow

Pros and cons

Pros

  • Rated flow 73.33 GPM

Cons

  • Must be rated for at least your pump's flow
  • Backwashing wastes water

Limitations to weigh

  • Specifications are the maker's or seller's own; check fit against your equipment's manual and part numbers.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

MaterialPolypropylene (PP)Retailer
Dimensions (seller)23.43"L x 20.47"W x 25"HRetailer
Product weight37.9 lbRetailer
Max flow (maker)73.33 gpmRetailer
Voltage120 V ACRetailer
Horsepower (maker)1 hpRetailer
Model numberHCP750A-FRetailer
Filter typeSand FilterRetailer
Pool typeabove groundRetailer

Alternatives worth comparing

More pool filters we cover

All pool filters, compared in one table · Every VEVOR product we cover

Final verdict

A practical sand filter for matching an existing pump.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What is the VEVOR HCP750A-F Sand Filter for?
The VEVOR HCP750A-F Sand Filter is a sand filter, rated for up to 73.33 GPM. At that flow it suits a pump moving no more than 73 GPM; match it to your pump's actual flow.