Why it matters
The MICOE 75,000 BTU Pool Heat Pump is a pool heat pump rated at 75,000 BTU for pools up to 21,000 gallons. Before heat losses, that output would raise a 20,000-gallon pool by 10°F in about 22 hours.
Heat pumps move heat from the air, so they cost far less to run than gas, but their output falls as the air cools; they suit holding a temperature through a warm season.
The listing gives dimensions of 42 x 15.7 x 29 inches and a weight of 164.7 pounds.
Who it's for, and who should skip it
Good fit if
- Pools up to 21,000 gallons
- Holding a set temperature
Look elsewhere if
- Cold-weather heating
Pros and cons
Pros
- 75,000 BTU
- Rated to 21,000 gallons
Cons
- Output drops in cool air
- Needs a 230V circuit on larger models
Limitations to weigh
- Specifications are the maker's or seller's own; check fit against your equipment's manual and part numbers.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Dimensions (seller) | 42 x 15.7 x 29 inches | Retailer |
|---|---|---|
| Product weight | 164.7 lb | Retailer |
| Model number | MSHP-021Y1 | Retailer |
| Pool size (maker) | 21,000 gal | Retailer |
| Heating output (maker) | 75,000 BTU | Retailer |
| Fuel / power | Heat Pump | Retailer |
| Pool type | above-ground and inground | Retailer |
Alternatives worth comparing
More pool heaters and heat pumps we cover
Final verdict
A sensible heat pump for pools up to 21,000 gallons.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure