Why it matters
The FibroPool 20,000 BTU Pool Heat Pump is a pool heat pump rated at 20000 BTU for pools up to 5000 Gal. Before heat losses, that output would raise a 20,000-gallon pool by 10°F in about 83 hours.
Heat pumps move heat from the air, so they cost far less to run than gas, but their output falls as the air cools; they suit holding a temperature through a warm season.
The listing gives a weight of 77.8 pounds.
Who it's for, and who should skip it
Good fit if
- Pools up to 5000 Gal
- Holding a set temperature
Look elsewhere if
- Cold-weather heating
Pros and cons
Pros
- 20000 BTU
- Rated to 5000 Gal
Cons
- Output drops in cool air
- Needs a 230V circuit on larger models
Limitations to weigh
- Specifications are the maker's or seller's own; check fit against your equipment's manual and part numbers.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Product weight | 77.8 lb | Retailer |
|---|---|---|
| Model number | FH220 | Retailer |
| Pool size (maker) | 5000 Gal | Retailer |
| Heating output (maker) | 20000 BTU | Retailer |
| Voltage | 240v | Retailer |
| Fuel / power | Heat Pump | Retailer |
| Pool type | above ground | Retailer |
Alternatives worth comparing
More pool heaters and heat pumps we cover
Final verdict
A sensible heat pump for pools up to 5000 gal.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure