Heat pump · Varpoolfaye

Varpoolfaye 30,000 BTU Pool Heat Pump

Heat pump for pools

Updated October 2026

Quick verdict

A solid heat pump for pools up to 8000 gallons.

Strength
30,000 BTU.
Trade-off
Output drops in cool air.
Right buyer
Pools up to 8000 gallons.
Pool type
Above Ground
Pool size (maker)
8000 gal
Voltage
120v
Heating output (maker)
30,000 BTU
COP (maker)
5.8
Fuel / power
Electric
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Varpoolfaye 30,000 BTU Pool Heat Pump is a pool heat pump rated at 30,000 BTU for pools up to 8000 gallons. Before heat losses, that output would raise a 20,000-gallon pool by 10°F in about 56 hours.

Heat pumps move heat from the air, so they cost far less to run than gas, but their output falls as the air cools; they suit holding a temperature through a warm season. The listing states a COP of 5.8.

The listing gives dimensions of 35 x 14 x 22 inches and a weight of 113.3 pounds.

Who it's for, and who should skip it

Good fit if

  • Pools up to 8000 gallons
  • Holding a set temperature

Look elsewhere if

  • Cold-weather heating

Pros and cons

Pros

  • 30,000 BTU
  • Rated to 8000 gallons
  • COP 5.8

Cons

  • Output drops in cool air
  • Needs a 230V circuit on larger models

Limitations to weigh

  • Specifications are the maker's or seller's own; check fit against your equipment's manual and part numbers.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Dimensions (seller)35 x 14 x 22 inchesRetailer
Product weight113.3 lbRetailer
Model numberKSPF-007L1MR1A2Retailer
Pool size (maker)8000 galRetailer
Heating output (maker)30,000 BTURetailer
Voltage120vRetailer
Fuel / powerElectricRetailer
COP (maker)5.8Retailer
Pool typeAbove GroundRetailer

Alternatives worth comparing

More pool heaters and heat pumps we cover

All pool heaters and heat pumps, compared in one table · Every Varpoolfaye product we cover

Final verdict

A solid heat pump for pools up to 8000 gallons.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How long does the Varpoolfaye 30,000 BTU Pool Heat Pump take to heat a pool?
About 56 hours to raise 20,000 gallons by 10°F before heat losses; a cover shortens that a lot.